MotionCam
Motion detector with a photo camera to verify alarms
Motion detector
Visual alarm verification
Transmits a photograph in under 9 sec
Sees in the dark
Communicates at a distance of up to 1700 m from the hub
More than a photo. Faster than a video.
With MotionCam, you’ll know about the actual situation at home even before the burglars understand that they’re busted. An animated series of photos follows the instant motion alarm for an accurate situation appraisal.
1. Motion detected
2. Alarm raised
3. Situation captured
MotionCam detector requires Hub 2 for operation
Engineered to respect privacy
MotionCam is designed to control your security, not your personal life. The motion detector is unable to take pictures by request. The camera activates only in response to a motion alarm. The data is encrypted throughout the processes of transmission and storage. No one analyzes it, even the AI. You won’t need to live under the constant supervision of the security cameras to know why the alarm went off.
Photo capture only when alarmed
All pictures are encrypted
We don’t see your photos
Only when the motion is detected, MotionCam takes pictures and transmits them to the Ajax Cloud storage. All data sent to Ajax Cloud is protected with AES-256 encryption in transit and at rest. Only the hub authorized users can have access to their Ajax Cloud virtual storage and see the pictures made with the MotionCam devices linked to their hub. Ajax Cloud is based on the AWS servers which are fully compatible with the GDPR regulations.
Dispels any suspicions
MotionCam ignores pets (up to 50 cm in height) using the SmartDetect algorithm. But if an especially curious pet manages to set off the alarm, the following photo report will confirm that the house is safe.
Unique wireless technologies
Jeweller
Wings
MotionCam simultaneously uses two specialized radio protocols: Jeweller for sending instantaneous alarms and Wings for rapid image delivery. You’ll receive the first snapshot of the event within 9 seconds after motion is detected. As usual, the alarm notification will arrive in a split of a second, even if the signal is unstable.
You can set up MotionCam at a distance of up to 1700 meters from the hub to establish visual control of the most critical areas. The new detector features a record-breaking operating efficiency with up to 4 years of battery life.
Two-way communication
channel at a distance of up to
1700m
First photo
delivered in under
9sec
Up to 4 years of operation on the
pre-installed batteries
Intuitive to pair and install
MotionCam connects to the Ajax security system in a few taps. Open the Ajax app, scan the QR code, and assign the detector to one of the rooms.
Mount the detector on a wall without disassembling. Make sure that no vases, wardrobes, or glass objects are blocking its view angle. You’re all set!
Easy to pair with a QR code
Fast mounting with a SmartBracket
Mobile app to adjust, test, and control
Connection
Installation
Connection