dco-xl-l_1x.jpg

DualCurtain Outdoor

Wireless outdoor bidirectional curtain motion detector

Protecting property boundaries

DualCurtain Outdoor controls your property perimeter without creating obstacles for people who are already inside. Two independent optical systems with narrow viewing sectors and flexible settings allow you to accurately adjust 30 meters of the detection zone, excluding possible sources of false alarms. The ELSA (Extended Live Signal Analysis) unique software reacts to intruders, screening out triggers like natural interferences and pets.

dco_night_1x.jpeg
block1_anim_0108.png

To play, press and hold the enter key. To stop, release the enter key.

Two detectors in one

To play, press and hold the enter key. To stop, release the enter key.

Masking  sensors

To play, press and hold the enter key. To stop, release the enter key.

Unique optical systems

To play, press and hold the enter key. To stop, release the enter key.

Flexible settings of detection zones

Detection

Engineering accuracy

On the sides of the detector there are two optical systems with narrow viewing sectors, each equipped with two PIR sensors. Thanks to temperature compensation, detection is always accurate. Sensor signals are analyzed by our new ELSA digital algorithm. Only if two sensors of the same optical system simultaneously capture human motion, the detector activates an alarm.

Capture.JPG

Instant response to intruder

Pet immunity

Know-how

Efficiency in the near area

DualCurtain Outdoor features a technology to expand the protected area, which is unique among outdoor curtain motion detectors. When Near Area Detection is enabled, the detector’s upper PIR sensor receives an additional narrow viewing sector directed at the angle of 40 degrees down against the main sector. The feature allows both sensors to detect movement when a human crosses the protected perimeter closely to the detector’s body, addressing the problem of the blind spot, which is a typical problem of such detectors.

Near Area Detection is designed to protect windows and other passages that animals have no access to. The proximity of the detection zones’ vectors significantly reduces the efficiency of pet immunity.

Near Area Detection mode is a patented technology of Ajax Systems.

Near Area Detection technology is supported by both DualCurtain Outdoor optical systems

Near Area Detection

11.JPG

Settings

One enclosure. Two independent detectors.

The detection range of the two optical systems is adjusted independently. It allows you to precisely set the perimeter guarded by DualCurtain Outdoor and avoid false alarms caused by a bush swaying in the wind or people passing on a public sidewalk. So that the detector’s field of view is not blocked by a column or downpipe on a facade, the optical systems can be shifted vertically. In the app, you can adjust the sensitivity or deactivate one of the optical systems.

The range is determined within 15 meters for each optical system

Detection distance

6.JPG
5.JPG
block4-2-tab2_1x.jpg

Sector of view of each optical system shifts 3° horizontally

a.JPG

Beam direction

Both or only one optical system can be used

b.JPG
all_sides_app_1x (1).jpg
12.JPG

Resistant to attacks

DualCurtain Outdoor can not be unnoticeably blinded or disabled even if Ajax is disarmed. Detector’s optical systems are reinforced with advanced masking sensors that respond to obstacles, covering and painting the lenses. The tamper will not allow to unnoticeably remove the device from the mount. And even if the detector is instantly destroyed, it will take the hub less than a minute to detect the loss of communication and inform a central monitoring station and users about the problem.

13.JPG
masking_1x.jpg

Outstanding autonomy

Due to its low energy consumption, DualCurtain Outdoor operates for years from pre-installed batteries. A monitoring station and users will be warned in advance about the need for the device maintenance.

14.JPG
15.JPG
battery_1x.png

Installation without brain teasers

The process of connecting and configuring DualCurtain Outdoor saves the installation engineer’s time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time while testing detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without site visits.

Connecting

Installing

Setting Up

Adding to the system via QR code

22.JPG

Wireless outdoor motion detector with an advanced anti-masking system and pet immunity

mpo-mco-card-xl_1x.png

Wireless outdoor motion detector with visual alarm verification, advanced anti-masking system, and pet immunity

prof_xl_1x.webp

Qualified engineers guarantee the quality installation of devices and disclosure of all the features of your security system. Contact a certified Ajax partner for help.

Tech specs

1 Depends on the region of sale

Choose the most suitable Ajax set in 2 minutes

Tell us what you need to protect and we will put together a set of detectors and devices for your premises.